FIX ALL ITEL HANG ON LOGO PROBLEMS (FLASH PROCESS STOP WITH REPARTITION ERROR)

Requirements

spd factory download Tool click here to download
Research download Tool/SPD upgrade tool click here to download
Firmware for your Phone model

Procedure

1. Flash with Factory Download tool

Extract and launch factory download tool

Load the iTel pac file you want to flash

Click start button and connect device while holding volume down button

FactoryDownload tool will detect the phone and download some files then stop at R_NV_W

At this point you are required to disconnect the phone from PC

Disconnect phone remove battery and connect again while holding volume down key

The tool will detect device and download some other files the stop again at FDL2 requiring you disconnect phone from PC

Disconnect phone remove battery and connect again while holding volume down key

Now phone will flash normally but stop at system

After about few seconds when it stuck, click stop button and disconnect phone from PC

2. Flash device using Research Download Tool

Extract and launch Research download tool

Load the pac file you used above

Click start button and connect phone while holding volume down key

Flashing process will start and and finish normal with no break points

That's it, you have successfully fixed your stubborn iTel phone